Schneider Conext XW Pro 6848 Hybrid Inverter/Charger

Schneider Conext XW Pro 6848 Hybrid Inverter/Charger

The Conext XW Pro 6848 is nearly identical to the Conext XW+ 6848. It is a highly flexible split-phase and three-phase* 6.8kW hybrid inverter and 140-amp battery charger that supports both DC coupled and AC coupled off-grid and grid-tie system architectures. Dual AC inputs allow the Conext XW Pro to hook up with both the grid and a generator, and a scalable design allows you to combine up to four XW Pro inverters to create systems up to 34 kW as you add more solar panels.

What's Different From the Conext XW+ 6848?

Unlike the Conext XW+ 6848, the Conext XW Pro is:

• Compliant with new and upcoming utility regulations in North America, including Rule 21 (California), HECO Rule 14H (Hawaii), and PREPA (Puerto Rico)
• Compatible with the Conext Insight 2 online tool for single- or multi-system management and configuration
• Not supported by Conext ComBox. For monitoring and configuring the XW Pro, the Conext Gateway, InsightHome, or InsightFacility must be used (available on the "Accessories" tab).

Schneider Conext XW Pro 6848 Hybrid Inverter/Charger Features

Future-Ready

• Compliant with latest North American and Australian electric utility requirements including Rule 21, HECO Rule 14H, PREPA, UL 1741-SA, IEEE 1547, and CSA 107.1
• Field-serviceable if repairs are needed
• 5-year warranty with additional 5 years (10-year warranty total) if registered within 6 months of purchase

Efficient

• 95.1% maximum efficiency
• Intelligent functionality enables solar prioritization, load shifting, peak shaving, and assists small generators with heavy loads
• High load starting power with 8500W (30-minute) and 12,000W (1-minute) surge rating

Easy installation

• Compact wall-mounted design
• Dual AC inputs allow integration with the grid and a generator
• Superior balance-of-system component integration simplifies connections to battery bank, charge controllers, and generators
• Commission the entire system with PC software tool and Conext Gateway/InsightHome/InsightFacility - click here for commissioning guide
• See the Schneider design guide for details and bill of materials needed for the following system types:
  • Single-phase and 3-phase systems 6kW - 40kW
  • Off grid, grid interactive, and grid tied with backup systems
  • AC coupled and DC coupled systems
  • Optional generator integration (PV backup systems requiring a generator for powering loads and charging batteries)
  • Systems compliant to California Rule 21, UL1741SA, UL9540, SGiP, HECO, and PREPA

Flexible

• Can be used in split- or three-phase* systems up to 34 kW
• Works with both AC and DC coupled off-grid and grid-tied system architectures
• Compatible with lithium-ion batteries

*Note: Firmware update plus XW 3-Phase Breaker Kit and two XW Connection Kits (available separately on the "Accessories" tab) required for three-phase operation.

Documents

Schneider Conext XW Pro 6848 Hybrid Inverter/Charger spec sheet
Schneider Conext XW Pro 6848 Hybrid Inverter/Charger owner's manual
Schneider Conext XW Pro 6848 Hybrid Inverter/Charger installation guide
Schneider Conext XW Pro 6848 Hybrid Inverter/Charger warranty information
Schneider Electric quick reference design guide
Schneider XW Pro / KiloVault integration guide
Schneider XW Pro / KiloVault HAB closed loop communication guide