The FLEXpower TWO pre-wired power panels integrate two inverter/chargers and all of the essential protective devices in an easy-to-install, fully pre-wired and factory tested system. The FLEXpower TWO is applicable for either grid-tied or off-grid applications with medium sized power requirements such as homes, light commercial or larger back-up power systems. Utilizing a compact design and an easy-to-install mounting plate, the FLEXpower TWO System can be mounted in either a horizontal or vertical orientation to allow installation in more space-limited locations.
Each FLEXpower TWO includes two inverter/chargers, AC and DC wiring boxes, a MATE2, HUB, and AC/DC Surge Protector. Inverter breakers and an AC Input-Output-Bypass Assembly are pre-installed on the FLEXpower TWO. There are also mounting locations for an AC GFDI Type B style outlet and additional DC and AC breakers. Optional kits are available for charge controllers and DC system monitoring. The optional charge controllers are shipped with the power panel bu t not installed. The control wiring option comes with an array input breaker and wiring installed for one charge controller. For each charge controller required, order one charge control option, one control wiring option, and an applicable GFDI option. For one charge controller, the single pole GFDI will work; for 1 or 2 charge controllers, use the 2 pole GFDI. The MATE3 option substitutes a Mate3 instead of a Mate 2.
FLEXpower TWO components are Listed to applicable UL standards for a code compliant installation.
Dimensions are 46.5 x 20.25 x 13 inches. Weight is 232 lbs.